Turnkey Garage, ADU & Home Office
Comfort Upgrade — Installed in 1 Day
Dedicated 120V Electrical Circuit + 12,000 BTU Smart Heat Pump + Full Drywall & Stucco Restoration. Fixed Price. Zero Subcontractors.
- Covers up to 500 sq. ft. with ultra-efficient cooling & heating (down to 19°F, up to 126°F)
- No 240V Panel Upgrade Required — runs safely on a dedicated 115V/120V line (1 slot in panel)
- Complete Wall Patching & Finish Included — seamless drywall repair & paint touch-up
Why Hire 3 Subcontractors When 1 Dual-Licensed Team Does It All?
Most HVAC installers won't touch high-voltage electrical panels, and electricians won't patch your stucco. SkillSee combines General Building (B) and Electrical (C-10) to eliminate delays, finger-pointing, and hidden fees.
- Subcontractor 1 (HVAC company, $4,000): Mounts the unit, core drills hole, and leaves dangling wires because "we don't pull high-voltage lines."
- Subcontractor 2 (Electrician, $1,000+): You spend days calling C-10s. They charge a high minimum to pull one circuit and install a disconnect switch.
- Subcontractor 3 (Drywaller / Painter, $500+): You have to find a handyman to patch rough drywall cutouts and exterior stucco holes. Paint rarely matches.
- Zero Unified Accountability: If an issue arises, the HVAC guy blames the electrician, and the electrician blames the equipment.
- In-House C-10 Electrical: We safely install a dedicated 120V/20A circuit, breaker, and exterior disconnect box with zero sub-contracting.
- General B Structural & Mounting: Wall framing reinforcement, precision core drilling, anti-vibration condenser ground pad, and weatherproofing.
- Flawless Drywall & Stucco Restoration: We patch all interior drywall, texture-match, and seal exterior stucco to factory standards.
- Single Point of Contact: One licensed contractor, one transparent fixed-price agreement, and an ironclad 1-year warranty.
Smart, Quiet, and Energy-Efficient Climate Control
Carefully selected 12,000 BTU inverter technology designed specifically to thrive on existing California electrical panels without expensive utility upgrades.
Uthfy 12,000 BTU 19 SEER2 Ductless Heat Pump
Model: HY12GWH115 · 115 Volt Easy-Install Design · Home Depot Pro Internet #342156866
This state-of-the-art inverter unit is the primary equipment included in our $2,950 – $3,450 1-Day Turnkey Comfort Packages. Specifically engineered to run smoothly on standard 115V household power without requiring a $4,000 electrical service upgrade.
12,000 BTU Power
High-efficiency inverter compressor delivers rapid cooling even during 126°F LA heatwaves and keeps rooms cozy down to 19°F winter cold.
115V / 120V Standard Power
Requires only ONE single-pole breaker slot in your panel. Operates smoothly on standard 100A/125A panels without overloading main bus bars.
Wi-Fi & Voice Automation
Full smartphone app integration for iOS & Android. Set schedules, pre-cool from your phone, and control temperature via Amazon Alexa or Google Home.
Whisper-Quiet (<25 dB)
Ultra-low sound profile quieter than a quiet library whisper. Ideal for critical Zoom video calls, recording studios, and restful sleep.
Clean Dedicated 120V Circuit Installation
No messy splices or piggybacked circuits. We run clean EMT conduit or concealed Romex to a brand-new dedicated single-pole breaker and exterior disconnect.
Paintable Line-Set Cover & Sealed Stucco
All exterior lines are shielded inside durable UV-resistant PVC channels, paintable to match your siding, with waterproof elastomeric stucco sealant.
All-Inclusive Packages. No Surprise Add-Ons.
Choose the package that fits your space. Every package includes licensed labor, electrical, equipment, and structural finishes.
- Dedicated 120V/20A Circuit: Industrial-grade surface EMT conduit + Exterior Disconnect Box
- Structural Wall Framing: Header backing support & precision diamond core drilling
- Uthfy 12,000 BTU 115V Heat Pump: Included with 10 ft pre-charged line set (Other brands like Mitsubishi, Daikin, or MrCool available with price adjustment)
- Weatherproofing & Sealing: Exterior penetration weather collar & silicone sealing
- Standard Wall Control: Wireless remote + digital temperature display
- Concealed Electrical Routing: Hidden through attic or crawlspace to exterior disconnect
- Uthfy 12,000 BTU Smart Heat Pump: Included with 10 ft factory-sealed lines (Other top brands like Mitsubishi or Daikin available with price adjustment)
- Weatherproofing & Insulation Wrap: UV-resistant protective line wrap & exterior penetration silicone seal
- Full Drywall & Stucco Restoration: Texture matching, seam mudding & paint touch-up
- Smart Wi-Fi App & Alexa Control: Full smartphone pairing and onboarding assistance
- Licensed C-10 Electrical: Full 120V or 240V dedicated line, breaker, and disconnect box
- General B Structural Mounting: Heavy-duty bracket install & structural stud attachment
- Wall Penetration & Sleeving: Core drill hole, protective plastic sleeve & weather sealing
- Drywall & Stucco Patching: Complete cosmetic restoration around wall penetrations
- Condenser Pad Setup: Anti-vibration pad leveled on grade or wall bracket mounting
Optional: SkillSee 1-Year Total Unit Replacement Guarantee
Add complete peace of mind for +$350. If any compressor or circuit board hardware fails in year one, we do not wait for warranty parts — we swap it for a brand-new unit within 48 hours.
Check If Your Room Qualifies for Instant Fixed Pricing
To keep our price fixed and guarantee a 1-day turnaround, your space should meet these 3 simple structural criteria. Click each item to verify:
The indoor unit will be placed on an exterior wall where the outdoor condenser can sit back-to-back or within a 10 ft line run.
The room or garage is 500 sq. ft. or smaller, which the 12,000 BTU system easily covers for rapid temperature regulation.
Your main electrical breaker box or subpanel has at least 1 open single-pole breaker slot for a dedicated 120V line.
Skip the Forms — Text Us 2 Photos
Snap two quick photos with your phone and text them directly to our licensed project managers. We'll verify panel capacity and give you an exact, binding fixed quote in 15 minutes.
Where you want the indoor unit installed.
Open the panel door so breakers are visible.
Or Request a Callback
Leave your details and an estimator will call you back within 15 minutes during business hours (Mon–Sat, 8am–7pm).
How Our Dual-Licensed Crew Completes It In 1 Day
Precision planning means zero guesswork. Our fully stocked service vehicle brings every fitting, disconnect box, conduit, and patch compound to complete your installation in a single visit.
1. Electrical Circuit & Prep
Our C-10 electrician inspects the panel, installs the new 120V/20A breaker, runs dedicated conduit/wiring, and sets the weatherproof exterior disconnect box.
2. Structural Mount & Core Drill
Under General B oversight, our crew installs structural backing, drills a clean 3" sloped wall penetration with core bit, mounts the indoor plate, and sets the condenser pad.
3. Pre-Charged Connection
We route the sealed 10 ft line set, connect the high-voltage whip to the disconnect, seal the wall sleeve with acoustic and thermal insulation, and apply UV-rated weatherproofing wrap.
4. Wall Match & Handover
We apply fast-setting drywall compound, match wall texture, seal exterior stucco, power up the system, calibrate Wi-Fi with your phone, and conduct a full walkthrough.
Frequently Asked Questions
Clear answers about our dual licensing, California building compliance, and equipment performance.
Frequently Asked Questions
Expert answers to common questions about Los Angeles construction and remodeling.
Why does SkillSee do this under General B & C-10 rather than an HVAC license?
In California, installing a turnkey mini-split room package requires three separate skillsets: running a dedicated 120V/20A electrical circuit from your breaker panel (CSLB C-10 Electrical), structural framing and wall penetration with exterior weatherproofing (CSLB General Building B), and restoring drywall/stucco to pristine finished condition (General B). Under California Business & Professions Code § 7057, a General Building Contractor is specifically authorized to take contracts that integrate multiple unrelated building trades. With factory pre-charged sealed systems, you get a fully legal, bonded, single-contractor execution without paying multiple subcontractor markups.
Will my current electrical panel handle this unit without a $4,000 panel upgrade?
Yes! Our package specifically utilizes a state-of-the-art 115V/120V inverter system that pulls only 9 to 12 running amps. It requires just ONE single-pole breaker slot in your existing panel. Unlike traditional 240V multi-zone central systems that require 40A to 60A and force expensive 200A service heavy-ups, this package operates safely and efficiently on typical 100A or 125A panels found across Southern California homes.
Can you install this in a garage workshop, detached ADU, or second-story bedroom?
Absolutely. We have dedicated packages tailored for each: surface EMT conduit for finished garages/workshops, concealed attic/crawlspace line routing for master bedrooms and home offices, and custom setups for backyard studios. As long as the wall has exterior clearance within 10 feet of the outdoor condenser pad, fixed package pricing applies.
What brand and model of heat pump equipment is included in this promo?
Our featured promotional turnkey package includes the Uthfy 12,000 BTU 19 SEER2 Smart Inverter Mini-Split Heat Pump (Model HY12GWH115, 115V). It comes complete with factory pre-charged R32 refrigerant lines (10 ft), smart Wi-Fi mobile control, ultra-quiet operation (<25 dB), and reliable performance down to 19°F and up to 126°F. If you prefer another well-known brand — such as Mitsubishi Electric, Daikin, Fujitsu, MrCool, Pioneer, or Gree — we can easily source and install it! In that case, the package price will be adjusted based on the chosen manufacturer's hardware cost and electrical specifications (115V vs 240V).
How does the 1-Day installation timeline work?
Our licensed crew arrives at 8:00 AM with all materials, wire, disconnects, and equipment on our truck. By 11:00 AM the dedicated line and disconnect box are set. By 1:30 PM the unit is mounted, leveled, and sealed. By 3:30 PM drywall and exterior stucco are patched and color-matched, the system is tested, and we walk you through the smartphone app. Clean site, cold air, done in 1 visit.
What warranties are included?
All electrical craftsmanship, structural mounting, and waterproofing are backed by SkillSee's 1-Year Craftsmanship Warranty, alongside the manufacturer's 5 to 7 year compressor warranty. You can also add our optional SkillSee 1-Year Total Unit Replacement Guarantee for +$350: if any hardware component fails in year 1, we replace the entire unit within 48 hours.
